High speed structural evaporation and drying system.  Includes; Base unit with handle, 400’ 5/8 (equal red and blue) 200’ ¾” (equal red and Blue) , T assemblies, QD Wraps, 4 Tex units

250,000 BTU High speed structural evaporation and drying system.  Includes; Base unit with handle, 500’ 5/8 (equal red and blue) 200’ ¾” (equal red and Blue) , T assemblies, QD Wraps, 5 Tex units

Heat Transfer Exchanger used to transfer heat from TES solution to the flood water in the structure.

Kit, TES Wheel Set

Removable wheel set.  When installed on your TES heater, the Wheel Set allows you to move the heater out of your truck or trailer for job site flexibility and convenient storage.

tex Hose (5/8”) 50’ Red

5/8” X 50’ Red high-temperature insulated hose assembly with ½” M-F quick connects for connecting TES outlet solution tee to inlet of heat exchanger.  Pre-charged with TES fluid.

tex Hose (5/8”) 50’ Blue

5/8” X 50’ Blue high-temperature insulated hose assembly with ½” M-F quick connects for connecting TES outlet solution tee to inlet of heat exchanger.  Pre-charged with TES fluid.

tex Hose (5/8”) 25’ Red

5/8” X 25’ Red high-temperature insulated hose assembly with ½” M-F quick connects for connecting TES outlet solution tee to inlet of heat exchanger.  Pre-charged with TES fluid.

tex Hose (5/8”) 25’ Blue

5/8” X 25’ Blue high-temperature insulated hose assembly with ½” M-F quick connects for connecting TES outlet solution tee to inlet of heat exchanger.  Pre-charged with TES fluid.

tes Hose (¾”) 50’ Red

3/4” X 50’ Red high-temperature insulated hose assembly with ¾” M-F quick connects for connecting TES inlet solution tee to inlet of heater.  Pre-charged with TES fluid.

tes Hose (¾”) 50’ Blue

3/4” X 50’ Blue high-temperature insulated hose assembly with ¾” M-F quick connects for connecting TES inlet solution tee to inlet of heater.  Pre-charged with TES fluid.

Solution Tee Assy – TES Outlet

Tee fitting to connect single ¾” red TES heater outlet hose to two 5/8” red TEX hoses.  Can also be used to connect two 5/8” TEX hoses to the heater outlet.  Tee consists of one ¾” Male quick connect and two ½” Female quick connects.

Solution Tee Assy – TES Inlet

Tee fitting to connect single ¾” blue TES heater inlet hose to two 5/I” blue TEX hoses.  Can also be used to connect two 5/8” TEX hoses to the heater inlet.  Tee consists of one ¾” Female quick connect and two ½” Male quick connects.

Quick Connect ¾” Male Brass

¾” Male brass quick connects for TES hose assembly, solution tees and heater inlet.

Quick Connect ¾” Female Brass

¾” Female brass quick connects for TES hose assembly, solution tees and heater outlet.

Quick Connect ½” Male Brass

½” Male brass quick connects for TEX hose assembly, solution tees and heat exchanger inlet.

Quick Connect ½” Female Brass

½” Male brass quick connects for TEX hose assembly, solution tees and heat exchanger outlet.

TES Fluid  gallon  (in the case)

Specially formulated to protect equipment. No VOC’s. No hazardous ingredients. Exclusive for use with TES to protect machine and maintain warranty.

Exhaust Controller, Single Stage

Thermostat control gives you the ability to adjust your exhaust air flow according to the room temperature in your drying area.  Easily programmable for on-off operation of fans with single set point temperature up to 140º F.

Exhaust Controller, Dual Stage

Thermostat control gives you the ability to adjust your exhaust air flow according to the room temperature in your drying area.  Easily programmable for on-off operation of two fans with two different set point temperatures up to 140º F.

Sand Bag 10#

Ten pound sand bag with convenient carrying handle.  Bags are used to hold carpet on tack strip and seal carpet around heat exchanger.  Can also be used to direct airflow.  Made from plastic lined heavy duty polyester.

AT51
(42”-72”)

Door Rod

Adjustable door rod used to hold hoses up off the carpet to allow air flow through doorways to float hallway carpet and speed drying.  Also effective for creating barriers with plastic sheeting.  AT50 adjusts to doorways from 23” to 40” wide, AT51 adjusts to doorways from 42” to 72” wide.

Floator™

Stainless Steel and aluminum furniture stand with rubber pad.  Allows carpet to float underneath supported furniture.  Improves airflow and speeds drying.

Pad Pin™

Pad Pin used to secure pad to carpet around heat exchanger for air seal.  Apply through carpet anywhere to improve float or stop flapping.

Foam Filler

Crème Colored foam blocks used to fill gaps between floor and carpet at the sides of heat exchangers for air seal and improved float.

8”x8” deep, 10” high, 18” long.

Duct Ring 10.25” Diameter

Duct Ring is placed inside 10” diameter lay-flat ducting to prevent collapse and reduce flapping for improved exhaust air flow.

Duct Ring 14.5” Diameter

Duct Ring is placed inside 14” diameter lay-flat ducting to prevent collapse and reduce flapping for improved exhaust air flow.

QD Wraps – Large

Insulated protective wraps for TES Solution Tees.  Reduces heat loss and protects carpet and people from contact with hot brass fittings.

QD Wraps – Medium

Insulated protective wraps for TES Solution Tees.  Reduces heat loss and protects carpet and people from contact with hot brass fittings.

Hose Hanger Strap

Nylon strap with Velcro for wrapping, carrying and storing hoses.  3” wide X 23” long with hanger loop.

Velcro Strap

Attach hoses to floaters when running across carpet

2-Tank Propane Splitter

Hook two propane tanks to one machine with this propane splitter.  It connects two propane tanks by utilizing dual 2’ hoses and a tee with a female propane adapter.

3-Tank Propane Splitter

Hook three propane tanks to one machine with this propane splitter.  It connects three propane tanks by utilizing multiple 2’ hoses and a tee with a female propane adapter.

Customized Marketing Brochures

Full color customizable brochures for marketing tes to the Flood Insurance industry.  Lets the insurance provider know you have invested in the newest innovation in structural drying and restoration. (Order Here)

Valve Lockout

Lockable cover protects propane tank valves and prevents tampering.  (Does not include lock.)

Support Stand

Tes Mount Support Stand for secure tes Mounting.  Used under the tes unit with wheels attached to give extra stability during transport.

Trailer Fan Kit

Must have this item for trailer or vehicle mounting of tes.  Brings in 665cfm of fresh air to cool trailer and aid in combustion.  Use when ambient temperature exceeds 60 degrees F.  Draws .23 Amps.

Propane Tank Rack

Mount 3 100 lb. tanks on a 4’ Trailer Tongue

AT74

Air-Mover Aluminum Shelf

Keep your dryers and air movers safe and secure in this sturdy aluminum shelf for mounting in trailers or cube vans. 

Kit Hardware

Propane hoses and fittings for Trailer Install

Straps

Ratchet Strap 2-Pack (1” x 6’)

Straps

1”x15’ Ratchet Strap (single)

Double Axle Cargo Wagon

Extra capacity Double Axle Wells Cargo Wagon

TES Floor Anchor Install Kit

Removable TES Trailer Install Kit includes: (1) AT52, (1) AT78, (4) NM4392, (4) NM4394, (4) NM4328, (4) NM4329, (12) NM4360, (12) NM4362, (12) PA114 & (12) PA116

Brass tes ¾” by-pass gate valve

Gasket

Lid to Tank Gasket for lid assembly

½” Strainer

½” FPT Acorn Strainer

Plastic Lid Assembly

6-1/2” Diameter Plastic Lid Assembly with deck plate

O-Ring Lid Seal

O-Ring Lid Seal for NM5004 Plastic Lid Assembly

Propane Hose Assembly

10” X 1/2” with 3/8” MPT & ½” MPT ends

Propane Hose Assembly

Propane Hose Assy – 15’ X ½” with 3/8” MPT & ½” MPT ends

Pressure Regulator

Propane Pressure Regulator

Power Cord

50 ft. 12/3 w/Male & Female Ends

Lock Assembly 

For tes Control Panel & Hose Access Doors

Water Pressure Gauge

60 psi

Pin Snapper

TES Foot Mount

Plate

TES Wheel Mount Plate

Swivel Wheel

8” Pneumatic Swivel Wheel

Swivel Lock

For use with NM4224 Pneumatic Wheel

Rigid Wheel

8” Rigid Pneumatic Wheel

Gasket

Black Silicone Gasket for TEX

Toggle Clamp

Toggle Clamp for TEX

Clamp Stud

5/16-18 x 2” Threaded Clamp Stud for TEX

Clamp Bar

½’ x 3” Aluminum Clamp Bar for TEX

Toggle Switch

For TES Control Panel.  Includes On / Off Plate

Hour Meter

Rectangular 120VAC Hour Meter without bezel – Snap-in

Burner Orifice For For 0-1999 ft Elevation (4 Required)

Burner Orifice

Burner Orifice For For 2000-3999 ft Elevation (4 Required)

Burner Orifice

Hi-Altitude tes Burner Orifice For 4000-5999 ft Elevation (4 Required)

Burner Orifice

Hi-Altitude tes Burner Orifice For 6000-7999 ft Elevation (4 Required)

Pressure Relief Valve

50 PSI Pressure Relief Valve for tes

Propane Valve

Main tes 2-stage Propane Gas Valve

Flow Switch

Tes Flow Switch

Transformer

120 VAC to 24 VAC tes Transformer

Operator Control

2-Stage tes Operator Control

Hi-Limit Control

tes Hi-Limit Control

Ignition Control

Tes Burner Ignition Control

Temperature Gauge

tes Inlet / Outlet Temperature Gauge

FloJet Pump

FloJet D3621E3011A  - 30PSI Demand flow – 1.2GPM

115VAC motor – 0.5amp

EPDM – Chemical Resistant Diaphragm

D-Ring

Floor Anchor D-Ring

Exhaust Cap

7” J-cap tes Trailer Mount Exhaust Cap

Exhaust Cap TES Trailer Mount 8” J-cap

For 250,000 BTU TES units

Exhaust Pipe Galvanized

7” Diameter x 36”

For Standard 200,000 BTU TES units

Exhaust Pipe Galvanized

8” Diameter x 36”

For 250,000 BTU TES units

Adapter Exhaust Pipe Galvanized 7” Diameter x 8” Diameter

For Standard 200,000 BTU TES units

Adapter Exhaust Pipe Galvanized 8” Diameter x 10” Diameter

For 250,000 BTU TES units

Ball Valve ½” FPT – Brass Gas Shutoff

½” FPT Brass Gas Shutoff Ball Valve

Bracket Propane Regulator

Mounting - TES

Plate

TES Propane Bulkhead

Bulkhead Fitting

1/2” FPT Brass                                       

Elbow

90˚ 3/8” Street M-F Brass

Elbow

90˚ 1/2” F-F Brass                                 

Elbow

45˚ 1/4” Street M-F Brass                                       

Elbow

90˚ 1/4” Street M-F Brass

Elbow

90˚ 1/2” Street M-F Brass

Nipple

1/2” x 1-1/2” Steel  

Nipple

1/2” x 2” Steel         

Nipple

1/2” x 2-1/2” Steel

Adapter

1/2” Male Flare X 1/2” MPT Brass

Adapter

Male POL x ¼” MPT Brass

Adapter

1/2” Male Flare X 1/2” FPT Brass

Adapter

1/2” Male Flare X 3/8” FPT Brass                                          

Connector

1/2” Female Flare X 1/2” Female Flare Union Brass                                              

Nut

1/4-20 Hex                                             

Washer

1/4 Flat                                   

Washer

1/4 Lock                                  

Turnbuckle

For Anchoring TES

S-Hook

TES Anchoring

Screw

¼-20 x 1-1/4” Flat Head Phillips

Screw

#10 x 1” SS Pan Head Phillips Self Tapping

Screw

#8 x 1/2” SS Pan Head Phillips Self Tapping

TES Propane Install Kit

Propane Tanks Not Included

Trailer Propane System Parts  Kit Includes:
(1) AT70, (1) AT69, (1) NM4334, (1) NM4336, (1) BR272,

(1) NM4332, (1) NM4352, (1) BR282,  (1) NM4320, (2) NM4342,

(1) BR284, (1) NM4339, (1) NM4337, (1) BR286, (1) NM4344,

(2) NM4346, (1) BR296, (1) NM4348, (1) NM4350, (4) NM4370,

(12) NM4372 & (1) PMEF-181

TES Exhaust Install Kit

Kit Includes: (1) NM4330, (1) NM4387 & (1) NM4390

For Standard 200,000 BTU TES units

TES Exhaust Install Kit

Kit Includes: (1) NM4331, (1) NM4388 & (1) NM4391

For 250,000 BTU TES units

TES Fluid Filter Kit

Kit includes 6 Filter Cartridges

(Filter Cartridges: Part #NM4325A)

Tee 4-way female

Four way quick assy. for TES

Cap Outdoor Vent

TES Heater Outdoor Operation