High-Speed Structural
Drying System

e-tes: The Hot Little Sister

E-TES is the small flood hero for quick drying!

Fast and Profitable

Get in with a quick set-up, work your magic, and get out equally as fast. E-TES is an electric stand-alone version of the TEX box from the original TES. You can use one unit at a time as a stand alone heat dryer for the small job, or supplement a larger loss to target the tough area, or just add more heat.

Features

• 50 foot Heavy Duty 30amp GFCI (Ground Fault Circuit Interrupter) Power Cord with 3-prong and a 4-prong adapter for Dryer Plugs
• Adapters available for 3-prong and 4-prong Range outlets
• Panel Lights indicate power and safety switch status
• Safety Switches include:
  • Air Flow Switch
  • Dual Hi-Limit Temperature Switches
  • Safety Shutdown Temperature Switch
  • Ground Fault Circuit Interrupter

Simple

• Plug into any dryer or stove outlet (220-240 volt)
• Add any centrifugal blower
• Turn it on and dry with hot, dry air
• Dry carpet, pad, and walls all at the same time
• Dry inside walls and ceilings with hot, dry air, with the addition of an Octidry
• Dry hardwood floors and crawl spaces

Specifications
21,000 BTU 240V Electric Model
Height: 19-7/8”
Length: 24”
Width: 20-5/8”
Weight: 39 lbs.
Heater watt rating: 6200 watts
Maximum Amp Draw: 25.83 amps
Five year housing warranty
One year component warranty