TES (Thermal Energy System) Trailer Recommendations
The TES unit may be permanently mounted in a trailer or put on wheels to roll out of the trailer and run independently. A trailer has been specifically designed to meet all the ventilation, payload capacity, and usability requirements. Other trailers may be used if they meet the guidelines on this sheet. The complete TES package, including three full 100 lb. propane tanks**, weighs approximately 2,000 lbs.
Premium Model: Wells Cargo-Cargo Wagon
- Extra Capacity: 7' Width × 12’ Length × 6'-6" Height - This size allows you to stand upright in the trailer. It also allows you to stack TEX units four high, and has the capacity to carry the complete TES package along with extra equipment.
- Warranty: 6 years
- Payload Capacity: Double axle with a payload of 5,000+ lbs. allows for smoother towing and a better ability to spread the load to achieve proper tongue weight.
- Trailer Skin Color: White
- Ventilation: Two roof vents, 14" × 14"-Allows for hot air to escape. Roof vents must be open any time TES is running.
- Powered Fan: 10" 665 CFM 110V wall fan (furnished by Interlink distributor)-Mounted close to the floor always blowing into the trailer but not directly at the TES unit. This fan must be run any time the TES unit is in operation.
- Fuel Door: 12" × 12" - Allows hoses and cords to pass through when main doors are closed for security.
- 4' Straight Tongue: Required for proper mounting of propane tanks, allowing for adequate distance from tow vehicle. Standard trailer tongues are only 3' and will not work.
- Electric Brakes: The Dept. of Transportation requires electric brakes on trailers with a gross vehicle weight of 2,000+ lbs.
- Horizontal E-Track: The E-Track allows attachment of hoses to walls, tie downs to hold equipment in place, or various other uses. We strongly suggest one row 36" from the floor and a second row near the ceiling, all the way around the trailer.
- Corner Jacks: Placed on the rear corners of the trailer, adding stability for the stand-alone trailer.
- Flush Mounted Floor Tie-Offs: Mounted toward the rear of the trailer for securing TES if it is intended to leave the wheels on. Otherwise, TES can be bolted directly to the floor (see installation instructions in TES manual).
- Interior Dome Light
- 24" Aluminum Diamond Plate Stone Guard
- Double Axle: Hitch Connection for 2" ball
- Side Door: This option offers convenience for entering the trailer.
- Back Door: Double-sided Barn Style
|
|
The above accessories (except propane rack or tanks) are valued at $1,600 when purchased and installed separately through a local trailer dealer.
* If you supply your own trailer, these accessories may be purchased separately through Interlink Supply and installed by the trailer dealer.
** Propane tanks are not included. Tanks should be purchased from and installed by a qualified propane dealer.
EXAMPLES OF TES TRAILERS
|
